The problems are happening and it is time to do a hard reset Samsung S22. No matter why you need to do it: sell or want to solve some troubleshooting. The most important thing you should know is — this process will delete all your personal info, so after the reset, you will need to do the initial setup the first time. So make back up if you can or use the sync function.
If you want to solve some problems like freeze, app crash, or similar you need to try restarting your phone first.
How to restart Samsung S22 models
To restart Samsung Galaxy S22 you need:
Press the Power and Vol- buttons simultaneously for 10 seconds or until the restart begins.
How to reset S22 by using the menu
- Press the Menu
- Find and Select Settings
- General Management
- Reset
- Factory data reset
- And press Reset and Delete All
- You will be asked for the pin code or any other security option if you have one installed.
Factory reset Samsung S22 by using buttons
- Turn off your device. (Power+Vol- if you can’t do it)
- Connect the Type — C cable to the phone (it can be a PC or notebook, not a charging adaptor)
- Press Power and Vol + buttons together until you see the logo
- Release the Power and continue to press Vol+ until you see the recovery menu.
- Go to menu Wipe Data/Factory Reset (Use the VOL buttons to slide and Power btn to confirm)
- Select YES to confirm the operation
- To exit from the recovery menu after finishing select Reboot System Now if it does not start itself
How to reset S22 if you forgot the pin, password, pattern, or fingerprint not work correctly.
- Connect the cable type-c to your phone
- You need to restart your phone — Power + Vol – press until the phone is off
- When the phone is off (you have 1 second before it starts again) just press the Power and VOL + buttons
- If you see the logo release the Power but still push Vol+ until you see the recovery menu.
- Then choose the wipe data/factory reset and confirm.
What to do if resetting S22 doesn’t work?
First, you need to repeat the steps again.
From some new Android Versions, you must connect the USB Type c cable to the notebook or PC else, the reset function by using buttons does not work.
Press buttons until you see the change and only then release.